Speedline Joint Butter bag 15L -100564422
- Suitable for indoor use
- For finishing plasterboard with beveled edges and as a troweling product for calcium silicate bricks
- Can be used with paper, glass fiber, or mesh tape
- The first coat must be thoroughly dry before applying the second coat.
- For butt joints without AK, use glass fleece or paper tape.
- Brief mixing is recommended.
- Dilute by a maximum of 0.3 liters per 18.7 kg.
- Process at temperatures above 5°C.
- Always wear certified safety glasses and a dust mask when sanding.
Loyalty Points
Earn from this purchase
Max discount with points
Hotline Order:
Mon - Fri: 08:00 / 16:00
+31 854885920
This is Speedline Joint Butter in a 15-liter bag. It is a ready-to-use plaster paste that is highly suitable for finishing plasterboard. Speedline Joint Butter can be used for all phases, including filling joints between plasterboards. The plaster paste can be applied manually, mechanically, or with an airless sprayer.
Speedline Joint Butter has excellent properties. The material has low shrinkage, with up to 30% less shrinkage than regular paste. It is tear-resistant, easy to sand, and simple to apply.
For seams between (AK) plasterboards, it is recommended to use paper tape or mesh tape. You can use Speedline mesh tape for this purpose.
Application:
- Suitable for indoor use
- For finishing plasterboard with beveled edges and as a troweling product for calcium silicate bricks
- Can be used with paper, glass fiber, or mesh tape
- The first coat must be thoroughly dry before applying the second coat.
- For butt joints without AK, use glass fleece or paper tape.
- Brief mixing is recommended.
- Dilute by a maximum of 0.3 liters per 18.7 kg.
- Process at temperatures above 5°C.
- Always wear certified safety glasses and a dust mask when sanding.
Substrate:
Before using Speedline Joint Butter, it is important to prepare the surface. The surface must be clean, dry, and free of grease, wax, dust, and polish. Speedline Joint Butter is not suitable for areas directly exposed to water, such as bathrooms.
Depending on the substrate, a primer is recommended for optimal adhesion.
For smooth, non-absorbent surfaces: Speedline Concrete Contact
Highly absorbent surfaces (e.g. gypsum plaster, calcium silicate brick, or aerated concrete): Speedline Primer
Powdery, porous, or highly absorbent substrates: Speedline Deep Primer
Substrates contaminated with nicotine, coffee, tea, soot, water, or yellowing: Speedline Insulating Coating
Add your review
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.
Saniso+
Knauf Machine plaster MP75 E 5-25mm 25kg - 913512
Knauf Hand Plaster Goldband Quick 10-20mm 25kg - 583838
Knauf Plaster Goldband E 5-25mm 25kg - 913514
Speedline Fiberglass Joint Reinforcement Tape – 50 mm × 25 m - 103133868
speedline Garde
