STALCO stone chisels for masonry, concrete and demolition: flat, HEX, SDS-max and SDS-plus. Compare types at Saniso.
Manual Fastening Tools Guide: Tackers, Riveters & Consumables | Saniso
Manual fastening tools cover hand tackers, staples and type-I nails, blind riveters, glue guns and a soldering set — all hand-powered or light thermal tools, not pneumatic nailers. At Saniso the category Manual fastening tools lists 40 STALCO / STALCO PERFECT items (snapshot 2026-09-22 CEST). Saniso B.V. in Zwaag sells as a wholesale/webshop; it is not the manufacturer. Screwdriver bits sit in other Hand tools categories, not here.
Prices below are a snapshot (incl. and excl. 21% VAT). Always check the live product page.
What counts as manual fastening tools?
On Saniso this parent groups:
- Hand tackers / staple guns and matching staples or type-I nails
- Hand riveters (blind rivet tools) — tools only; rivet consumables are not on this listing
- Glue guns and glue sticks
- Soldering gun and solder wire
Browse the hub or go straight to staple guns and tackers, hand riveting tools, glue tools and soldering tools.
Hand tackers and staple guns
Multi-function tackers (A / I / U / T)
One body for several fastener families. Example: multi-function tacker STALCO S-21414 (A 6–14 mm, I / U / T) — ~€17.77 incl. / ~€14.69 excl. Simpler A-range tools include tacker A 4–14 mm STALCO S-21410.
Product titles that say “Tacker staples …” still refer to the tool on these product pages — not a staple pack.
Hammer tackers for G-type staples
Hammer action for thicker film, felt and similar. Example: hammer tacker STALCO PERFECT S-70580 (G 6 / 8 / 10 mm) — ~€36.06 incl. / ~€29.80 excl.
Cable and wire tackers (U-staples)
For routing wires and cables with U-staples. Example: tacker for wires and cables STALCO PERFECT S-21416 (U 10–16 mm).
More tools: staplers.
Matching staples and nails
Match staple type and length to the tool marking (A / 53, G, U, and where listed type I).
Type 53 / A-type lengths 6–14 mm
Example pack: type 53 staples 14 mm, 1000 pcs STALCO S-21214. For S-21208 use the product page length (8 mm on the EN URL and product page); the NL listing title has shown a mismatched millimetre in snapshot data.
G-type staples for hammer tackers
G packs sit with the hammer-tacker range, e.g. G-type staples 10 mm STALCO PERFECT S-70588.
U-type staples and type I nails
U-staples for cable tackers; type I nails where the tool lists “I”: nails type I STALCO PERFECT S-70324. Staple packs: staples.
Hand riveters / blind rivet tools
For sheet joints when you cannot reach the back side. Saniso lists tools only — not rivet consumables on this parent page.
Standard hand riveters (240–270 mm)
Example: riveter 270 mm STALCO PERFECT S-21614 — ~€18.62 incl. / ~€15.39 excl.
Double-point and scissor riveters
More leverage or dual positions: double-point riveter 280 mm STALCO S-21516, scissor riveter 460 mm STALCO S-21522. Category: riveters.
Glue guns and glue sticks
Light thermal bonding with ø 11.2 mm sticks. Powers on Saniso include 55 W, 80 W, cordless 80 W and 100 W.
Example cordless: cordless glue gun 80 W STALCO S-21060. Higher power Perfect: glue gun 100 W STALCO PERFECT S-70119 — ~€36.45 incl. / ~€30.12 excl.
Note on 80 W listings: two different product pages share the model string S-21100 in EN titles but differ in URL, internal product code and price (~€9.12 vs ~€23.11 incl.). The NL listing has labelled the dearer page as S-21110 STALCO PERFECT while that product page still shows S-21100 — check the live page you intend to buy. Sticks: glue sticks ø11.2×300 mm, 10 pcs S-70130.
Soldering gun and solder
For soft soldering: transformer soldering gun 100 W STALCO S-21610 and solder wire S-21620 (use the live product page; the site title repeats the model code).
How to choose the right tool for the job
| Job | Typical choice on Saniso |
|---|---|
| Light upholstery / thin sheet fastening | Hand tacker + A / 53 staples |
| Film, felt, outdoor covers | Hammer tacker + G staples |
| Cables / wires | Cable tacker + U staples |
| Sheet metal blind joints | Hand riveter (no rivets in this cat listing) |
| Quick thermal bond | Glue gun + 11.2 mm sticks |
| Soft solder | Soldering gun + solder |
Snapshot price band across the 40 items: roughly €0.70–€36.45 incl. 21% VAT.
Frequently asked questions
What is the difference between a hand tacker and a hammer tacker?
A hand tacker squeezes to drive staples; a hammer tacker strikes. Hammer models on Saniso are built around G-staples (e.g. S-70580).
Which staples fit type A, G, U and type 53?
Use the type and length printed on the tool. Saniso stocks 53/A, A, G and U packs in the ranges above — confirm on the staple product page.
When should I use a hand riveter instead of staples or glue?
When you need a blind rivet joint in sheet work and cannot reach behind the workpiece. See riveters in that category; blind rivets themselves are not listed on this parent page.
What is a cable tacker for?
U-staples to fix wires and cables — see S-21416 and U-staple packs.
Which glue gun power should I pick?
Saniso lists 55 W, 80 W (incl. cordless) and 100 W. Match stick diameter ø 11.2 mm packs to the gun; re-check the 80 W URL- and model-code difference above.
Can STALCO tackers drive type I nails?
Only where the tool listing includes “I” (e.g. multi-function / aluminium models) plus nails S-70324 — not every tacker.
What is a scissor riveter for?
Longer arms for leverage (460 mm S-21522). Double-point models add a second working position.
What does Saniso sell in this category?
Hand tackers and staples/nails, hand riveters, glue guns/sticks, and soldering tools — STALCO / STALCO PERFECT only (~40 items).
Contact: Saniso B.V., De Corantijn 95, 1689 AN Zwaag · +31 85 488 5920 · Contact.
Share:
STALCO wood chisels for carpentry and woodworking: 6–38 mm singles plus 6–25 mm sets. Compare sizes at Saniso.
STALCO PERFECT angle clamp for gluing frames and 90° corners: 75 mm width, 50 kg force. See specs and buy at Saniso.
STALCO quick-release clamps for woodworking and glue-ups: woodworking, lever and automatic types, openings to 900 mm. Co...