Fila Deterdek Pro 1 Liter + 1 Liter Cement Haze Remover
- Cleaning agent for post-installation and end-of-work cleaning.
- Removes cement residue after installation, as well as construction debris.
- Removes salt efflorescence from tiles.
- Removes limescale from floors, wall coverings, shower areas, and sanitary ware.
- Thoroughly cleans outdoor floors.
Loyalty Points
Earn from this purchase
Max discount with points
Hotline Order:
Mon - Fri: 08:00 / 16:00
+31 854885920
WHAT IS IT FOR?
- Cleaning agent for post-installation and end-of-work cleaning.
- Removes cement residue after installation, as well as construction debris.
- Removes salt efflorescence from tiles.
- Removes limescale from floors, wall coverings, shower areas, and sanitary ware.
- Thoroughly cleans outdoor floors.
- Removes limescale while cleaning, thanks to its high surfactant content.
- Effective against rust stains.
- Helps remove engobe residue from ceramic and porcelain tiles.
ADVANTAGES
- Buffered acid formula that produces no harmful fumes, making it a safer alternative to hydrochloric acid.
- Does not alter the appearance or colour of the materials.
- Cleans effectively without damaging surfaces.
- Respects grout joints.
- Does not damage aluminium and steel profiles or elements, such as housings and pipes, when used according to the instructions.
- Suitable for multiple materials, including tiles, porcelain tiles, ceramics, and acid-resistant natural stone.
- Multifunctional: cleans and removes limescale depending on the dilution ratio.
- Also effective for removing residual cement deposits.
INSTRUCTIONS FOR USE
Dilution: Dilute from 1:5 to 1:10, depending on the type and amount of dirt to be removed. For cement haze removal, dilute at 1:3.
Application
For cleaning after installation and at the end of construction work: Pre-wet the surface with water. Then apply DETERDEK PRO, diluted at a ratio of 1:5 or 1:10 (1 litre of product in 5 or 10 litres of water). Apply the solution to a few square metres at a time, leave it to act for 2–3 minutes, then work the product into the surface using a brush or single-disc machine. Remove the residue with a cloth or wet vacuum, then rinse thoroughly with clean water. If stubborn dirt remains, repeat the cleaning using a more concentrated solution.
For the extraordinary maintenance of outdoor surfaces with visible signs of wear, such as smog and dust: Dilute 1 litre of product in 10 litres of water. Then follow the same application instructions described above.
Caution:
- Do not use on polished marble or other acid-sensitive materials.
- Always test the product on a small, inconspicuous area first to ensure compatibility with the material.
- For aluminium elements, use the product according to the instructions and apply it with a soft sponge.
Consumption:
Approximately 40 m² per litre at a dilution ratio of 1:5.
Add your review
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.
Saniso+
Fila Kit Starter For thoroughly cleaning new bathrooms and floors
Fila Brio 750 ml + 750 ml Universal cleaner
