Fila Zero Sil: Silicone remover
- removes residues of silicone, glue, adhesive tape, old labels, and polyurethane foam
- removes candle wax and resin residues
- helps remove superficial grease and oil stains
- suitable for removing tar and asphalt stains
- can be used on marble, stone, grout, and other absorbent materials to remove surface residues
- suitable for porcelain stoneware, ceramics, marble, glass, and metal surfaces
Loyalty Points
Earn from this purchase
Max discount with points
Hotline Order:
Mon - Fri: 08:00 / 16:00
+31 854885920
Silicone, Adhesive & Residue Remover
A powerful, ready-to-use remover designed to dissolve and remove silicone, glue, adhesive tape, old labels, polyurethane foam, and other stubborn surface residues. Its viscous formula acts directly on the residue, ensuring maximum effectiveness with minimal product waste. The product also includes a practical spatula for quick and easy removal.
WHAT IS IT FOR:
- removes residues of silicone, glue, adhesive tape, old labels, and polyurethane foam
- removes candle wax and resin residues
- helps remove superficial grease and oil stains
- suitable for removing tar and asphalt stains
- can be used on marble, stone, grout, and other absorbent materials to remove surface residues
- suitable for porcelain stoneware, ceramics, marble, glass, and metal surfaces
ADVANTAGES:
- viscous formula acts directly on the residue for targeted and effective cleaning
- fast-acting formula dissolves hardened silicone in approximately 20 minutes
- supplied with a practical spatula for easy residue removal
- pleasant citrus fragrance
- ready to use with no dilution required
PACKAGING:
250 ml tin; boxes of 12.
STORAGE & APPLICATION TEMPERATURE:
- storage temperature: 0°C to 30°C
- apply the product at a material temperature between 5°C and 30°C
INSTRUCTIONS FOR USE:
UNDILUTED: Ready to use.
APPLICATION:
- Remove as much of any particularly stubborn residue as possible using a suitable sharp tool, such as a utility knife, knife, or razor blade. Take care not to damage the surface.
- Shake well before use, then apply the product to completely cover the residue.
- Allow the product to act for approximately 20 minutes.
- Remove the softened residue using the supplied spatula, then wipe the surface with a cloth or paper towel.
- Repeat the treatment if necessary, allowing a longer contact time for particularly stubborn residues.
- Clean the spatula thoroughly with a cloth or paper towel after use.
WARNINGS:
- keep out of reach of children
- do not release the product into the environment after use
- the product may dull methacrylate, plastic, lacquered materials, and resin-based agglomerates
- always perform a preliminary test to check the material's resistance to the product
- surfaces treated with wax may need to be re-waxed after cleaning
Add your review
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.