Fila Kit Starter For thoroughly cleaning new bathrooms and floors

This starter kit is ideal for thoroughly cleaning a newly completed bathroom and/or living room floor.

PACKAGE CONTENTS

• 1 × FILA DETERDEK PRO – 1 L (cement haze remover)
• 1 × FILA CLEANER PRO – 1 L
• 1 × Green Scotch-Brite cleaning sponge
• 1 × Microfibre cloth
• 1 × Pair of gloves

FILA DETERDEK PRO – WHAT IS IT FOR?

• An acid-based cleaner and cement haze remover for cleaning wall and floor tiles after installation and at the end of construction work.
• Removes cement residue after the installation of wall and floor tiles.
• Removes salt efflorescence from tiles.
• Removes limescale from floors, wall coverings, shower areas, and sanitary ware.
• Thoroughly cleans outdoor floors.
• Removes limescale while cleaning, thanks to its high surfactant content.
• Effective against rust stains.
• Helps remove engobe residue from ceramic and porcelain tiles.

ADVANTAGES

• Buffered acid formula that produces no harmful fumes, making it a safer alternative to hydrochloric acid.
• Does not alter the appearance or colour of the materials.
• Cleans effectively without damaging surfaces.
• Does not damage cementitious grout joints.
• Does not damage aluminium and steel profiles or elements when used according to the instructions.
• Suitable for multiple materials, including tiles, porcelain, ceramics, and acid-resistant natural stone.
• Multifunctional: cleans and removes limescale depending on the dilution ratio.
• Also effective for removing residual cement deposits.

HOW TO USE

Dilution:

• 1:5 to 1:10 depending on the type and amount of dirt to be removed.
• 1:3 for removing cement haze.

Cleaning after installation and at the end of construction work:

• Pre-wet the surface with water.
• Dilute FILA DETERDEK PRO at a ratio of 1:5 or 1:10 (1 litre of product in 5 or 10 litres of water).
• Apply the solution to a few square metres at a time.
• Leave it to act for 2–3 minutes.
• Work the product into the surface using a brush or single-disc machine.
• Remove the residue with a cloth or wet vacuum.
• Rinse thoroughly with clean water.
• If stubborn dirt remains, repeat the process using a more concentrated solution.

Extraordinary maintenance of outdoor surfaces with visible signs of dirt and wear, such as smog and dust:

• Dilute 1 litre of product in 10 litres of water.
• Follow the same application instructions described above.

Caution:

• Do not use on polished marble or any other acid-sensitive material.
• Always test the product on a small, inconspicuous area first to ensure that the material is compatible with the product.
• For aluminium elements, use the product according to the instructions and apply it with a soft sponge.

Consumption:

Approximately 40 m² per litre at a dilution ratio of 1:5.

FILA CLEANER PRO – UNIVERSAL CLEANER FOR HARD FLOORS AND SURFACES

Suitable for:

• Lacquered parquet
• Ceramic tiles
• Laminate
• Linoleum
• Natural stone
• Terracotta

Available in: 1 L and 5 L packaging.

WHAT IS IT FOR?

• Provides gentle yet effective cleaning for all types of hard floors.
• Respects treated, delicate, and sensitive surfaces.
• Particularly suitable for cleaning polished natural stone floors that are sensitive to aggressive cleaning agents.

BENEFITS

• Cleans effectively without being aggressive.
• At high dilutions (1:200), no rinsing is required, as it leaves no residue.
• Highly concentrated and suitable for a wide range of dilution ratios.
• Highly biodegradable.
• Ideal for the maintenance of wax-treated surfaces.
• Can be used at high dilutions (up to 1:200) in floor-cleaning machines.
• Ideal for laminate flooring.

HOW TO USE

Dilute two capfuls of FILA CLEANER PRO in 10 litres of water, then clean the floor using a mop.

For use with a floor-cleaning machine, dilute the product according to the recommended ratio.

Coverage:

1 litre is sufficient for approximately 1,500 m², depending on the dilution ratio and application method.