Manual Fastening Tools: Tackers & Riveters | Saniso

Manual fastening tools include hand tackers with staples or nails, blind riveters, glue guns and soldering sets: hand-powered or light thermal tools for fixing without compressed air. Choose the tool by material and job, and always use matching consumables. Below we explain each tool type and which staples, rivets and glue sticks fit.

Prices below are a snapshot (incl. and excl. 21% VAT). Always check the live product page.

What counts as manual fastening tools?

On Saniso this parent groups:

• Hand tackers / staple guns and matching staples or type-I nails
• Hand riveters (blind rivet tools) — tools only; rivet consumables are not on this listing
• Glue guns and glue sticks
• Soldering gun and solder wire

Browse the hub or go straight to staple guns and tackers, hand riveting tools, glue tools and soldering tools.

Hand tackers and staple guns

Multi-function tackers (A / I / U / T)

One body for several fastener families. Example: multi-function tacker STALCO S-21414 (A 6–14 mm, I / U / T) — ~€17.77 incl. / ~€14.69 excl. Simpler A-range tools include tacker A 4–14 mm STALCO S-21410.

Product titles that say “Tacker staples …” still refer to the tool on these product pages — not a staple pack.

Hammer tackers for G-type staples

Hammer action for thicker film, felt and similar. Example: hammer tacker STALCO PERFECT S-70580 (G 6 / 8 / 10 mm) — ~€36.06 incl. / ~€29.80 excl.

Cable and wire tackers (U-staples)

For routing wires and cables with U-staples. Example: tacker for wires and cables STALCO PERFECT S-21416 (U 10–16 mm).

More tools: staplers.

Matching staples and nails

Match staple type and length to the tool marking (A / 53, G, U, and where listed type I).

Type 53 / A-type lengths 6–14 mm

Example pack: type 53 staples 14 mm, 1000 pcs STALCO S-21214. For S-21208 use the product page length (8 mm on the EN URL and product page); the NL listing title has shown a mismatched millimetre in snapshot data.

G-type staples for hammer tackers

G packs sit with the hammer-tacker range, e.g. G-type staples 10 mm STALCO PERFECT S-70588.

U-type staples and type I nails

U-staples for cable tackers; type I nails where the tool lists “I”: nails type I STALCO PERFECT S-70324. Staple packs: staples.

Hand riveters / blind rivet tools

For sheet joints when you cannot reach the back side. Saniso lists tools only — not rivet consumables on this parent page.

Standard hand riveters (240–270 mm)

Example: riveter 270 mm STALCO PERFECT S-21614 — ~€18.62 incl. / ~€15.39 excl.

Double-point and scissor riveters

More leverage or dual positions: double-point riveter 280 mm STALCO S-21516, scissor riveter 460 mm STALCO S-21522. Category: riveters.

Glue guns and glue sticks

Light thermal bonding with ø 11.2 mm sticks. Powers on Saniso include 55 W, 80 W, cordless 80 W and 100 W.

Example cordless: cordless glue gun 80 W STALCO S-21060. Higher power Perfect: glue gun 100 W STALCO PERFECT S-70119 — ~€36.45 incl. / ~€30.12 excl.

Note on 80 W listings: two different product pages share the model string S-21100 in EN titles but differ in URL, internal product code and price (~€9.12 vs ~€23.11 incl.). The NL listing has labelled the dearer page as S-21110 STALCO PERFECT while that product page still shows S-21100 — check the live page you intend to buy. Sticks: glue sticks ø11.2×300 mm, 10 pcs S-70130.

Soldering gun and solder

For soft soldering: transformer soldering gun 100 W STALCO S-21610 and solder wire S-21620 (use the live product page; the site title repeats the model code).

How to choose the right tool for the job

Snapshot price band across the 40 items: roughly €0.70–€36.45 incl. 21% VAT.

Frequently asked questions

What is the difference between a hand tacker and a hammer tacker?

A hand tacker squeezes to drive staples; a hammer tacker strikes. Hammer models on Saniso are built around G-staples (e.g. S-70580).

Which staples fit type A, G, U and type 53?

Use the type and length printed on the tool. Saniso stocks 53/A, A, G and U packs in the ranges above — confirm on the staple product page.

When should I use a hand riveter instead of staples or glue?

When you need a blind rivet joint in sheet work and cannot reach behind the workpiece. See riveters in that category; blind rivets themselves are not listed on this parent page.

What is a cable tacker for?

U-staples to fix wires and cables — see S-21416 and U-staple packs.

Which glue gun power should I pick?

Saniso lists 55 W, 80 W (incl. cordless) and 100 W. Match stick diameter ø 11.2 mm packs to the gun; re-check the 80 W URL- and model-code difference above.

Can STALCO tackers drive type I nails?

Only where the tool listing includes “I” (e.g. multi-function / aluminium models) plus nails S-70324 — not every tacker.

What is a scissor riveter for?

Longer arms for leverage (460 mm S-21522). Double-point models add a second working position.

What does Saniso sell in this category?

Hand tackers and staples/nails, hand riveters, glue guns/sticks, and soldering tools — STALCO / STALCO PERFECT only (~40 items).

Contact: Saniso B.V., De Corantijn 95, 1689 AN Zwaag · +31 85 488 5920 · Contact.